8
Call 1300 369 273
www.enware.com.au
1. Attach water source to the 40mm inlet camlock fitting
(SEE IMAGE 15)
.
Use only clean water to fill the tank.
2. Turn on water supply and commence filling.
3. Take note of the water level indicator
(SEE IMAGE 16).
When it reaches the yellow level, activate the shower and
eye wash to flush the line and to test operation.
When activating the eye wash for the first time, take the
aerators out of eye wash outlet to clear the line of any
debris.
Check for any leaks in joints and connections.
4. Turn shower and eye wash off, and continue to fill.
Replace aerators onto the eye wash outlet.
5. Once water starts to flow out from the internal overflow,
turn off the infeed water and disconnect from the 40mm
camlock fitting.
(SEE IMAGE 15)
COMMISSIONING COMPLETE
Shower and eyewash are now commissioned and tank shower
and eyewash are ready for use.
commissioning
IMAGE 15
IMAGE 16
FULL
EMPTY