2
Call 1300 369 273
www.enware.com.au
TIME FLOW MODEL (ENM5071):
The tap will run for a set period of time, regardless
of further hand movement. The flow time is
factory set to 6 seconds. This can be increased to
9, 12, or 15 seconds if required (see appendix –
Sensor Programs).
WAVE-ON WAVE-OFF MODEL (ENM5072):
Once the sensor is activated, the valve will remain
open and water will flow until the hand is again
passed in front of the sensor, closing the solenoid
valve. It is not necessary for the object to remain
in the beam for the unit to keep the valve open.
If the solenoid valve remains open for more than
45 seconds, the unit will time-out and close the
valve automatically. This is intended to conserve
water and prevent overflows. The time-out period
can be adjusted to 15, 30, 45, or 60 seconds (see
appendix – Sensor Programs).
The Enmatic Wall Sensor Tap is a sensor operated, hands-free tap that is installed onto walls above
sinks, basins or wash troughs. It operates by sensing a hand passing the front of the sensor unit.
The wall sensor tap kit comes standard with a sensor panel with a fixed aerated spout, a 1/2” solenoid
valve, a sensor panel bracket, and a 24 AC volt power pack.
For ENM5072, choose either 205mm or 250mm spout.
PRODUCT DESCRIPTION
SENSOR PLATE & SPOUT
BRACKET
SOLENOID
TRANSFORMER
COMPONENTS:
