SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL
0345 27 27 810
13
05
Installation Instructions
SECOND FIX CONT. -
1.
b)
RIGHT HAND MOUNT (RH)
• Fix the mounting strips to the underside
of the unit with 4 x M5 x 16mm screws as
shown.
• Apply self adhesive rubber mounts to the
underside of the brackets, over the four
mounting holes.
• On RH mount units only, the fan signal
connectors should be swapped over on
the PCB control board to ensure proper
function of the unit. Units are configured
for LH mounting as standard.
For RH mount, reverse fan signal
connections. The extract fan is always
located at the bottom of the fan tower. The
bottom fan must always be positioned on
fan connector 2 indicated as ‘FAN 2’ on the
PCB.
• The PCB control board is found behind the
electronics cover on the reverse of the fan
unit.
