Envirovent energiSava 300, Руководство по установке

Страница: 30 / 48

SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL
29
08 Maintenance
Filter cleaning
User maintenance is limited to periodically
cleaning or replacing the filters. The filter only
has to be cleaned when indicated on the display
(it shows the text “FILTER”) or, if a multiple switch
with filter indication is mounted, when the red
LED at the switch lights up.
The filters must be replaced every year. It is not
permitted to use the appliance without filters.
Cleaning or replacing the filters:
1. Press the ‘-’ key for 5 seconds.
Open the filter door.
2. Remove the filters. As the filters are different
grades, remember the order in which the
filters are taken out.
3. Clean or replace the filters.
4. Place the filters back the same way as they
were taken out.
5. Close the filter door.
Switch on the appliance by pressing the key
‘-’ for 5 seconds.
6. After the filters have been cleaned or replaced,
press the “R” key for 5 seconds to reset the
filter indication. The text “FILTER” will blink
briefly to confirm that the filters have been reset.
Also when the message “FILTER” has not yet
appeared on the display, a filter reset can be
carried out; the “counter” will be reset to zero.
After the filter reset, the text “FILTER”;
disappears, the light at the multiple switch is off
and the display is back to operating mode.
>5 sec
>5 sec
5 sec