envea STACK 602, Руководство пользователя

Страница: 60 / 68

Appendix A – Alignment STACK 602
60
(PC-000848-MA Issue 5, December 2021)
ENVEA UK Ltd
4. Adjust the reading by manually turning bolts B and C slowly clockwise until
the maximum possible reading is reached. (Note that the reading will go up
when turning the bolts clockwise; however, turning them too far will cause
the reading to go down again.)
This procedure may be applied on both the Receiver and the Transmitter and
should be carried out during the
Initial Setup
of the control unit (see page
35
).