manualshive.com logo in svg

envea M-Sens WR3, Руководство по эксплуатации, Страница: 33 / 36

Поделиться
Скачать
envea M-Sens WR3 Скачать руководство пользователя страница 33

31

The edited data is transmitted to the Evaluation unit via “Device program”.  
Critical data concerning the ModBus communication and the calibration must be confirmed 
before the parameters are transmitted to the Evaluation unit:

✔

  If, when saving the parameters in the Evaluation unit, the system calibration data is 

changed, this action must be confirmed by checking “Overwrite calibration”.

✔ 

If, when saving the parameters in the Evaluation unit, the system interface parameter are 
changed, this must be confirmed by checking the selection “Overwrite baud r./address”.

 

8.3.5  On-Line representation

 

By clicking on “On-Line representation” button you will make a new windows appear. 

 

It will display: Sensor RAW value

 

 

Measured value

 

 

Sensor(s) status

 

(A file should be created in Data-logger settings first)

In addition, with the PC software,

 

•

the Evaluation unit parameters of the Evaluation unit can be saved in a file (Save 
configuration)

 

•

the Evaluation unit parameters can be loaded from a file (Load configuration)

 

•

the Evaluation unit parameters can be printed via the Windows standard printer (Print 
configuration)

 

•

the measured values can be logged in a data logger file (enter the file name and storage 
rate, and activate the data logger on the online display)

The software language can be set by right-clicking the “Sprache/Language/Langue” field in the 
bottom program line on “Deutsch/English/Français”.

Protection against unauthorised use:

The PC interface does not have a password prompt as it is assumed that only authorised 
personnel will have access to the PC and the software. The password to operate the display can 
be read and changed in menu 

7. System

 under 

7.7 Password

.

Содержание M-Sens WR3





































Отзывы:

Нет отзывов