46
Appendix 1 - RS232 Commands
RS232 Commands supported by the DMXStreamer
Command Description
Command Letter
Read RAM Command
D
Write RAM Command
W
Version Command
V
Show Command
H
DMX Properties Command
S
Set Speed Command
R
Most functions on the DMXStreamer, including starting and stopping Shows, capturing streams and loading
data files can be controlled via the RS232 serial port. The complete RS232 protocol definition document is
available from the
Download
section of the Enttec website at
www.enttec.com.
Appendix 2 - Location Information
Major Cities - locations and time zones
For information about a place where a DMXStreamer will be located,
time and date.com
maintain a really
useful internet resource that lists the time zones, latitude and longitude for a large number of cities across
the world.
Appendix 3 - Connector Pinouts
DMX OUT
Pin 1
Ground
Pin 2
Data -
Pin 3
Data
+
Pin 4
NC
Pin 5
NC
DMX IN
Pin 1
Ground
Pin 2
Data -
Pin 3
Data
+
Pin 4
Switch
*
Using the remote switch
*
The switch function is activated by making an electrical connection between Pin 4 (Switch) and Pin 1
(Ground) of the DMX Input.
RS232
Pin 2
TX
Pin 3
RX
Pin 5
Ground