Streamer Utilities
34
Save Playlist to DMXStreamer
The
Save to DMXStreamer
button initiates the transfer of the current Playlist to the DMXStreamer. The
status of the transfer is indicated by a progress bar that appears at the bottom of the window.
Note: The DMXStreamer should not be switched off while recording or data transfer operations are in
progress.
Update Firmware
The Update Firmware function provides a facility to update the firmware (internal software) of a
DMXStreamer.
Downloading new firmware
To obtain the latest revision of the DMXStreamer firmware, visit the DMXStreamer page in the
Downloads
section of the Enttec website at
www.enttec.com
.
The firmware file (
main.rom
) must be extracted from the downloaded Zip archive before it can be installed.
The preferred location for the file is in the Streamer Utilities folder.
ROM File
The firmware upgrade file must be selected with the
Browse
button before commencing the update
process.
Preparing the DMXStreamer
The DMXStreamer must be started in System Mode in readiness to load the updated firmware.
(See
System
Mode
on page 46).
Loading the new firmware
1.
Select the
Activate
button in Streamer Utilities.
2.
Select and enter option
2-1-Change Main
on the DMXStreamer.
3.
The LCD status display on the DMXStreamer shows the progress of the data transfer.
2-1-Change Main
0 kbytes done
A progress bar also appears at the bottom of the Streamer Utilities window
4.
When loading is complete, the LCD status display shows:
2-1-Change Main
Programming Done
5.
The DMXStreamer should be re-started.
