Menu System
12
Starting a Show each time a new customer enters a showroom, even if the previous Show has not yet
completed. (Using the
Switch Closed
option.)
Starting a Show at 18:15:32 on July 4
th
and repeating it four times. (Using the
Looped Auto Play
option.)
Starting a Show and repeating it continuously, whenever the building management computer system
draws the blinds. (Using the
Remote Command
option.)
Starting a Show at sunrise every Tuesday and repeating it continuously until an hour and five minutes
after sunset. (Using the
Timed Auto Play
option.)
Timing
Looped Auto Play
The
SCROLL
button steps through the list of Timing options [Looped Auto Play | Timed Auto Play | Power
ON | Switch Closed | Remote Command]
The
ENTER
button accepts the selected Timing method and then advances to the Time or Loop
option. As
Events may overlap, it is important to understand the priority of scheduled Events in the DMXStreamer.
See
Replay Priority
on page 41.
Looped Auto Play
Timing
Looped Auto Play
The Show will start at a specified time, loop for the programmed number of repetitions and then stop.
The Event's start time and the number of loop repetitions must be entered.
Timed Auto Play
Timing
Timed Auto Play
The Show starts at a specified time and loops continuously until a specified finish time.
The Event's start time and end time must be entered.
Power ON
Timing
PowerOn
The Show will start when the DMXStreamer has completed its power-up sequence, loop for the programmed
number of repetitions and then stop.
The number of loop repetitions must be entered.
Switch Closed
Timing
Switch Closed
The Show will start when an electrical connection is made between Pin 4 (Switch) and Pin 1 (Ground) of the
DMX Input connector, on the back panel of the DMXStreamer. It will loop for the programmed number of
repetitions and then stop.
A switch closure Show preempts any scheduled Event currently running.
The number of loop repetitions must be entered.
