System Mode
44
Remove loopback cable
-press key
When the internal test process has been successfully completed, the screen will read:
TEST DONE
On entering the key test sequence, the screen will display:
Keys Down: none
Pressing the
SCROLL
button will produce the message:
Keys Down: 2
Pressing the
ENTER
button will produce the message:
Keys Down: 3
Pressing the
MENU
button will exit the self test and return to the top level of the system menu.
If any other screen messages are displayed, please visit the Support area of our website at
www.enttec.com
and fill out a support request ticket detailing the error message.
The time and date will now need to be reset through the
Setup
option on the main operating menu system
(see
5-Setup
on page 20)
2-Firmware
The firmware options prepare the DMXStreamer for a firmware (internal system software) update.
2-1-Change Main
On selecting this option with the
ENTER
button, the DMXStreamer enters update mode and waits for data on
the RS-232 port from a Windows™ computer running the Streamer Utilities software.
2-1-Change Main
0 kbytes done
The completion counter increments during loading of the firmware.
(see
Update Firmware
on page 36 )
To exit upgrade mode without upgrading the firmware - do nothing at all on the Windows™ computer - just
switch off the DMXStreamer and re-start it.
3-Checksum
This option displays a hexadecimal checksum of the firmware in the DMXStreamer, to aid with advanced
system diagnosis.
Enttec support may require the checksum data for troubleshooting purposes.
