Entrust Artista CR875, Инструкция по установке и руководство администратора

Страница: 99 / 150

CR825 and CE875 Instant Issuance System Installation and Administrator’s Guide 89

RetransferLaminationSpeedLayer2Side2 —The speed at which to apply the second layer of
retransfer film to side 2 of the card. The setting applies to the card stock specified in
CardStockDisplayed .

RetransferLaminationSpeedSide2 —The speed at which to apply the retransfer film to side 2
of the card if the card design does not include inhibitor or smart card programming. The
setting applies to the card stock specified in
CardStockDisplayed .

RetransferRollerTemp —The temperature (in degrees Celsius) of the heated roller when
applying the retransfer film to side 1 of the card stock specified in CardStockDisplayed . The
heated roller remains at the specified temperature.

RetransferRollerTempSide2 —The temperature (in degrees Celsius) of the heated roller when
applying the retransfer film to side 2 of the card stock specified in CardStockDisplayed . The
heated roller remains at the specified temperature.
The following settings are used when a ribbon without a primer (P) panel is installed in the
printer. The primerless ribbon requires a compatible retransfer film and is supported only for PVC
or composite card stock.

V2RetransferLaminationSpeed —The speed at which to apply the retransfer film to side 1 of
the card for the card stock specified in CardStockDisplayed .

V 2RetransferLaminationSpeedLayer2 —The speed at which to apply a second layer of
retransfer film to side 1 of the card.

V2RetransferLaminationSpeedLayer2Side2 —The speed at which to apply a second layer of
retransfer film to side 2 of the card.

V2RetransferLaminationSpeedSide2 —The speed at which to apply the retransfer film to
side 2 of the card. The setting applies to the card stock specified in CardStockDisplayed .

V2RetransferRollerTemp —The temperature (in degrees Celsius) of the heated roller when
applying the retransfer film to side 1 of the card stock specified in CardStockDisplayed . The
heated roller remains at the specified temperature.

V2RetransferRollerTempSide2 —The temperature (in degrees Celsius) of the heated roller
when applying the retransfer film to side 2 of the card stock specified in CardStockDisplayed .
The heated roller remains at the specified temperature.