Entrust Artista CR875, Инструкция по установке и руководство администратора

Страница: 101 / 150

CR825 and CE875 Instant Issuance System Installation and Administrator’s Guide 91
Retransfer
The
Retransfer
settings define values for the retransfer process.
Change settings as needed, and then click
Set Current
to apply the changes.

BacksideCoolingDelay
—The number of seconds that the card remains in the flipper to cool
between front side and back side retransfer.

EmbosserHandoffCoolingDelay
—The number of seconds the card remains in the printer
before it is moved into the embosser. This allows the card time to cool before moving into the
embosser. This setting applies only to systems with an embosser.

LaminatorHandoffCoolingDelay
—The number of seconds the card remains in the printer
before it is moved into the laminator. This allows the card time to cool before moving into the
laminator. This setting applies only to systems with a laminator.

RetransferVersion
—The retransfer process used by the printer. Versions 1 and 2 are used
when ribbons with a primer panel are installed in the printer. Printers with primerless ribbons
always use Version 3, regardless of the version specified in this setting.

SecondRetransferCoolingDelay
—The number of seconds that the card is allowed to cool
before a second layer of retransfer film is applied.
Description Default Value
Current Value
(unit) Allowed Range
1) BacksideCoolingDelay 0 0 [0 – 120]
2) EmbosserHandoffCooling
Delay
0 0 [0 – 120]
3) LaminatorHandoffCooling
Delay
0 0 [0 – 120]
4) RetransferVersion Version1 Version1
5) SecondRetransferCooling
Delay
20 20 [0 – 120]