Entrust Artista CR875, Инструкция по установке и руководство администратора

Страница: 98 / 150

88 Printer Manager
Change settings as needed, and then click Set Current to apply the changes.

CardStockDisplayed —Select the card stock whose settings you want to view and change on
this page. Click Set Current to apply the card stock. You must do this before making any
changes to the card stock settings. The changes you make to the settings on this page apply
to the selected card stock. Click
Set Current again to save your changes.
The settings apply whenever the named card stock is loaded in the printer, as specified in
Hopper(1–6)CardStockLoaded or ExceptionCardStock Loaded .
You can define up to 10 card stock types.

DebowDistance —The distance necessary to debow the specified card type. You can set a
different value for each card stock specified in CardStockDisplayed .

DebowDwell —The time, in milliseconds, to apply the debow action to the specified card
stock. You can set a different value for each card stock specified in CardStockDisplayed .

DirectPeelLaminationSpeed —The speed at which to apply the retransfer film to side 2 of the
card if the card design includes inhibitor or smart card programming. The setting applies to
the card stock specified in
CardStockDisplayed .

ExceptionCardStockLoaded —The card stock that will be inserted in the exception slot.

Hopper(1–6)CardStockLoaded —The card stock loaded in the input hopper. If a multi-hopper
is installed, you can specify a different card stock for each hopper cartridge.

ImpressDepthOffset —This setting currently is not used by the printer.

ImpressDwellTimeOffset —This setting currently is not used by the printer.

ImpressTemperatureOffset —This setting currently is not used by the printer.

RetransferCoolTime —The time, in milliseconds, to allow the card to cool after the retransfer
completes.

RetransferLaminationSpeed —The speed at which to apply the retransfer film to side 1 of the
card for the card stock specified in CardStockDisplayed .

RetransferLaminationSpeedLayer2 —The speed at which to apply the second layer of
retransfer film to side 1 of the card. The setting applies to the card stock specified in
CardStockDisplayed .
V2RetransferLaminationSpeed
Side2
10 10 [10.0 – 34.0]
V2RetransferRollerTemp 165 165 [140 – 190]
V2RetransferRollerTempSide2 165 165 [140 – 190]
Description Default Value
Current Value
(unit) Allowed Range