Protocol VLAN Configuration Screen
3-26
VLAN Configuration
Protocol Type
(Selectable)
Select one of the following protocol types:
IP – pertains to all IP associated Ether Types (i.e., 0x0x0800, 0x0806,
and, 0x8035).
IPX – pertains to all IPX associated Ether Types (i.e., 0x8137,
0x8138, and special cases, 0x0100 [LLC Type 1 Encapsulation] and
0x0101 [LLC Type 2 Encapsulation]).
Appletalk – pertains to all Appletalk associated Ether Types (i.e.,
0x809B and 0x80F3).
Netbios – pertains to all Netbios associated Ether Types (i.e. 0x0102).
Banyan Vines – pertains to all Banyan Vines associated Ether Types
(i.e., 0x0103 and 0x0BAD).
DECNET – pertains to all DECNET associated Ether Types.
CUSTOM – when this field is chosen, Ether Type “0x0” displays so
the user can input a particular Ether Type.
NOTE:
Any Ether type selected or entered in the Ether type field and
saved will become part of the selection in the protocol field.
For details, refer to
Section 3.8.1
.
Feature Status
(Toggle)
Enables or disables the entries. The entries can be made but are not
affective until this field is set to ENABLED. The choices for this field
are:
ENABLED
DISABLED
Action
(Toggle)
Used to add or delete an entry (Priority) and its protocol. This field
toggles between [ADD/MODIFY] and [DELETE].
ADD/MODIFY– adds the new Priority and Protocol Type entries (for
example, Priority [0] and Protocol Type [Banyan Vines]).
DELETE – deletes an existing entry with the associated priority (for
example, Priority [0] and Protocol Type [Banyan Vines]).
Table 3-6
Protocol VLAN Configuration Screen Field Definitions (Continued)
Use this field …
To …
