Port Filtering Configuration Screen
VLAN Configuration
3-19
3.6.1
Displaying VLAN IDs Associated with a Port
To display the VLAN IDs and VLAN Names of the VLANs associated with a particular port,
proceed as follows:
1.
Use the arrow keys to highlight the
Port
field.
2.
Use the SPACE bar or BACKSPACE key to step through the available port selections. The
screen displays the Port VLAN List of the selected Port. If ALL is selected, no VLAN ID or
VLAN Name information is displayed under Port VLAN List.
3.
To display additional VLANs that do not display in the current screen display, use the
NEXT
or
PREVIOUS
commands located at the bottom of the screen, as follows:
4.
To display the next screen, use the arrow keys to highlight
NEXT
. Press ENTER to view the
entries on the next screen.
5.
To display the previous screen, use the arrow keys to highlight
PREVIOUS
. Press ENTER to
view the entries on the previous screen.
Filter Using VLAN
Lists
(Toggle)
Filter out (drop) frames that are classified, via their VLAN tag, as
belonging to a VLAN that is not on the Port VLAN List and prevent
them from being forwarded by the switch.
This field toggles between YES and NO. YES enables filtering
according to the Port VLAN List. NO allows the switch to forward
the frames. The default is NO.
Filter All Untagged
Frames
(Toggle)
To filter out all incoming untagged frames so they will not be
forwarded by the switch. This field toggles between YES and NO.
YES enables the filtering of untagged frames. NO allows the switch
to forward untagged frames. The default is NO.
NOTE:
The NEXT and PREVIOUS fields will only display if there are further VLANs in
the list to page through.
Table 3-4
Port Filtering Configuration Screen Field Definitions (Continued)
Use this field …
To …
