Port Assignment Configuration Screen
VLAN Configuration
3-15
Field Definitions
3.5.1
Changing the Port Mode
To change the operational mode of a port, proceed as follows.
1.
Use the arrow keys to highlight the
PORT MODE
field for the module and port combination
you wish to change.
2.
Use the SPACE bar or BACKSPACE key to step through the available selections. A port may
be configured for any of the following modes:
•
HYBRID
– This is the default mode for all ports on the switch. The initial Port VLAN List
includes the PVID with a frame format of untagged. Any other VLANs desired for the Port
VLAN List need to be manually configured. By changing the default mode to 1Q Trunk or
1D Trunk, the Port VLAN List and the associated frame type are automatically configured.
•
1Q TRUNK
– This mode sets the port for transmitting to another 802.1Q aware device. In
this mode, all frames are transmitted with a tag header included in the frame (excluding
BPDUs). The switch will drop all untagged frames it receives on the 1Q Trunk port. The Port
VLAN List
for the port
includes all VLANs.
Table 3-3
Port Assignment Configuration Screen Field Definitions
Use this field …
To …
Port
(Read-Only)
See the port numbers of the interfaces of the current module.
Port Mode
(Selectable)
Display the current operational mode for the corresponding port and
select one of three modes: HYBRID, 1Q TRUNK, or ID TRUNK.
The default is HYBRID.
VLAN ID
(Selectable)
Select the ID number of the VLAN that is associated with the current
port (Port VLAN ID). This is the VLAN ID into which any untagged
frame will be classified. The default PVID is 0001.
FID
(Read-Only)
Display the FID associated with the VLAN ID. This field updates as
the associated VLAN ID field is changed.
VLAN Name
(Read-Only)
Display the name that is associated with the current VLAN ID. If a
name was not assigned to a VLAN, “NOT DEFINED” displays as
the VLAN name.
