Enterasys Matrix N Standalone Series, Руководство по настройке, Страница: 930 / 1372

IP Configuration Command Set
Performing a Basic Router Configuration
12-18 Matrix NSA Series Configuration Guide
12.2.3.3 Configuring the Router
You can configure the router using either of the following methods.
Using a downloaded file...
1. Download a router config file to the standalone or chassis using the copy command as described
in Section 2.2.8.5 .
2. Run the configure command using the downloaded config file as described in Section 2.2.8.4 .
Creating and saving a custom file...
1. Configure a module for routing using the set router command as described in Section 2.3.2.2 .
2. Enable the router as described in Section 2.3.3 and configure it manually. (Refer back to
Figure 12-1 for an example of a basic config file.)
3. Save the configuration using the write file command as described in Section 12.2.2.2 .