Enterasys Matrix N Standalone Series, Руководство по настройке, Страница: 1196 / 1372

Security Configuration Command Set
Configuring
14-36 Matrix NSA Series Configuration Guide
14.3.4.10 set tacacs command
Use this command to enable or disable accounting or authorization on a per-command
basis.
set tacacs command { accounting | authorization } { enable | disable }
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Usage
In order for per-command accounting or authorization by a server to
take place, the command must be executed within an authorized session.
When per-command accounting is enabled, the server will log
accounting information, such as start and stop times, IP address of the client, and
so forth, for each command executed during the session.
When per-command authorization is enabled, the server will check
whether each command is permitted for that authorized session and return a
success or fail. If the authorization fails, the command is not executed.
Example
This example shows how to enable authorization on a command basis.
accounting |
authorization Specifies either accounting or authorization to
be enabled or disabled.
enable | disable Enable or disable accounting or authorization on a
per-command basis.
Matrix(rw)-> set tacacs command authorization enable