Enterasys Matrix N Standalone Series, Руководство по настройке, Страница: 39 / 1372

Startup and General Configuration Summary
Starting and Navigating the Command Line Interface
Matrix NSA Series Configuration Guide 2-13
2.1.6.3 Logging in with Administratively Configured Account
If the device’s default user account settings have been changed, proceed as follows:
1. At the login prompt, enter your administratively-assigned user name and press ENTER.
2. At the Password prompt, enter your password and press ENTER.
The notice of authorization and the Matrix prompt displays as shown in Figure 2-2 .
2.1.6.4 Using a Telnet Connection
Once the Matrix Series device has a valid IP address, you can establish a Telnet session from any
TCP/IP based node on the network as follows.
1. Telnet to the device’s IP address.
2. Enter login (user name) and password information in one of the following ways:
•
If the device’s default login and password settings have not been changed, follow the steps
listed in
Section 2.1.6.2 , or
•
Enter an administratively-configured user name and password.
The notice of authorization and the Matrix prompt displays as shown in Figure 2-2 .
For information about setting the IP address, refer to Section 2.2.3.2 .
For information about configuring Telnet settings, refer to Section 2.2.7 .
Refer to the instructions included with the Telnet application for information about establishing a
Telnet session.
NOTE: Users with Read-Write (rw) and Read-Only access can use the set password
command ( Section 2.2.1.4 ) to change their own passwords. Administrators with Super
User (su) access can use the set system login command ( Section 2.2.1.2 ) to create
and change user accounts, and the set password command to change any local
account password.