Enterasys Matrix N Standalone Series, Руководство по настройке, Страница: 1360 / 1372

Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14-200 Matrix NSA Series Configuration Guide
14.3.15.8 set flowlimit port
Use this command to:
•
enable or disable flow limiting on one or more port(s),
•
assign a flow limiting user classification to one or more port(s). Once a classification is assigned,
these ports will be subject to the flow limit configured (with the
set flowlimit limit command as
described in Section 14.3.15.3 ) and the action configured (with the set flowlimit action
command as described in Section 14.3.15.5 ).
•
Enable an interface previously disabled by a flow limiting action.
set flowlimit port { enable | disable } | class { userport | serverport |
aggregateduser | interswitchlink | unspecified } | status { operational }
[ port-string ]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If port-string is not specified, settings will apply to all ports.
enable | disable Enables or disables flow limiting on specified ports.
class userport |
serverport |
aggregateduser |
interswitchlink |
unspecified
Assigns a user classification type to the port(s) as:
•
user port
•
server port
•
aggregation port
•
interswitch link
•
unspecified port
status operational Enables an interface previously disabled by a flow limiting
action.
port-string (Optional) Specifies port(s) on which to configure flow
limiting parameters.