Release Notes
Known Issues with this Release
RiverMaster™ Version 3.5
Page 9 of 18
AVN-RMRN-R312
Known Issues with this Release
The following issues have been observed since the last release:
RiverMaster Log Fails to Note Client Kit Building Error
When lack of disk space on the RiverMaster computer causes a new client kit
build to fail, a Packet Creation Failed message displays with an error number
but this error condition is not recorded in the log file. You should report the
error number to Customer Support. Bug # 2425.
RiverMaster Missing Option to Set Tracing on the ANG
Setting tracing on the ANG Tunnel Management Service is not an option in
RiverMaster but you may do so with the CLI command ./irctrace. For more
information, refer to the Application Note: ANG Configuration Using the
Command Line Interface. Bug # 3452.
L2TP Tunnels Not Included in Total User Count
RiverMaster does not include L2TP tunnels in its total user count of logged in
session on the main page although other tunnel types such as ezipsec and
IRPP are counted. You may run the
ircTunnel
command on the ANG’s CLI.
For more information, refer to the Application Note: ANG Configuration Using
the Command Line Interface. Bug # 3598.
Floppy Configuration Tool Does Not Save ANG Configuration
Since IPSec default values were removed from the APS database, Floppy
Configuration does not run correctly. To set these defaults, you must run the
ipsecDefault
script using the CLI on the remote ANG receiving the
configuration via a floppy disk.
CAUTION
This script first erases all IPSec configuration settings and then reloads it
with the factory default. Any configurations you added earlier are lost.
As a precaution against inadvertent use of the command, the script
interactively prompts you to confirm that you intend to erase and then
restore the initial IPSec configuration.
