393870-2 Rev 0: 11.07.2018 BBV
We reserve the right to change technical data without notice.
http://www.ensy.no
Page 24
3. Connections
3.1 Electrical connections
AHU-300 HV and HH is supplied with approximately 1.7 m cable and plug for 10A / 230V outlet.
The control panel is delivered together with the unit complete with
signal cable, length 10m. The signal cable to the control panel must have
at least 10 cm distance to high voltage cables.
The control panel is put into a standard box (el number: 1471089) and can be attached directly to the
wall. Make a suitable hole for the wire in the recess for wire in the box.
The control panel can also where concealed
wiring be attached to standard wall box
where the fastening screws in the wall box
has 60 mm cc. Break away the plate in the
bottom of the cap before screwing into the
wall box.
In order to dismantle the "touchpad" disc
and display this can easily be done by using
a knife with thin blade gently inserted
between the jacket and the front plate. Then flip the knife down so that the
frame loosens.
If the ventilation unit is installed in a way that makes it difficult to have
access to the plug when you have mounted the unit in the ceiling, then it
can be an advantage to install a switch so that you can turn off the power
on the power supply socket.
Connection points for control panel / sensors / external functions, look in
wiring diagram for details. (Connection points on unit, look at page 19
and 20)
When installing this extra control panel, remember to define it
as Display 2. Look at page 13 in this manual.
Plugs for connecting external sensors you find in the accessories bag supplied with
the unit.
