393870-2 Rev 0: 11.07.2018 BBV
We reserve the right to change technical data without notice.
http://www.ensy.no
Page 23
Demand controlled ventilation - adequate air quality
Air handling units should
be located in suitable
rooms in central
residence (utility /
laundry room) to ensure
easy access for service
and filter change.
Not allowed to be placed
in bathroom.
Humidity sensor:
Humidity sensor for forced
ventilation is integrated
into ventilation unit.
Motion Detector:
When installed in a living
room, this will give the
signal to the unit to
increase speed to max
airflow.
CO² sensor:
Can be installed in the
living room and will give
signal to the unit if the
pollution level in the
room is too hight.
Control panel:
Control panel placed at a
suitable place in the building
to do the monitoring and
regulation of ventilation as
simple as possible. Must not
be placed in bathrooms or
wet area.
The control panel should be
mounted on the wall.
The unit is designed
for connection of
external kitchen
hood.
This is an alternative
solution if problems
with piping from
cooker hood through
the outer wall.
Stove / Fireplace / Bathroom
Wireless control panel / pulse switch can
be used to increase supply by use of a
stove.
Mounted in a suitable location in relation
to the unit. Can also be placed near the
bathroom for easy operation by forced
ventilation (max airflow)
