www.ensembledesigns.com
Page 40
BrightEye NXT 450 Clean Streaming Router
Installation, Configuration and Operations Guide
Assigning Shortcut Buttons
Assign Sources and Destinations to the nine shortcut buttons on the
front panel in order to streamline router operation. You can have any
combination of Source, Destination and Unassigned shortcut buttons.
This task can be done only from the BrightEye NXT 450 front panel.
Default Shortcut Button Assignments
Input 1
(source)
Input 2
(source)
Port 3
(source)
TSG 1
(source)
Port 6
(source)
Decoder SDI
(source)
Output 4
(destination)
Output 5
(destination)
SDI Encoder
(destination)
Available Default Selections
Prior to any customization, the following default selections are
available for each of the nine shortcut button:
•
ASI Decoder
(destination)
•
SDI Encoder
(destination)
•
Output 5 (destination)
•
Output 4 (destination)
•
TSG 2 (source)
•
TSG 1 (source)
•
Encoder ASI (source)
•
Decoder SDI (source)
•
SFP 8 (source)
•
Port 6 (source)
•
Port 3 (source)
•
Input 2 (source)
•
Input 1 (source)
•
Unassigned (grey)
To assign the shortcut buttons
1. Press the Configuration button. The top level menus display. The top menu listed is Panel Config.
2. Press the right arrow button (or OK) to highlight the Shortcuts: Button Assignments submenu.
3. Press the right arrow button (or OK) to go to the Panel Config: Shortcuts button map.
4. Initially, the top left button is selected. Use the left and right arrow buttons to select the button
you want to configure.
5. Use the up and down arrow buttons to change which source or destination to which it is assigned.
Or you can map it to “Unassigned.”
6. Press OK to save your new selection to the highlighted shortcut button, or press the Configuration
button to cancel.
