www.ensembledesigns.com
Page 151
BrightEye NXT 450 Clean Streaming Router
Installation, Configuration and Operations Guide
Take Command
Description:
This command requests a Take of a previously set preset source to the specified
destination.
Syntax:
Message
Header:
<CR><Adr High><Adr Low><Len High><Len Low>
Cmd
Data:
T<Dest High><Dest Low>
T
ASCII character ‘T’ identifies this as Take cmd.
<Dest High>
High byte of Destination number.
Any valid ASCII hex digit. (E.g. ‘0’ to ‘9’ or ‘A’ to ‘F’).
<Dest Low>
Low byte of Destination number.
Any valid ASCII hex digit. (E.g. ‘0’ to ‘9’ or ‘A’ to ‘F’).
Example:
Request a Take of the previous set preset source to Destination 4.
Request:
In Hex
0D 30 30 30 33 54 30 34
In ASCII
<CR> 00 03 T 04
(spaces for readability only)
Response:
No serial response. If a preset source had previously been set for Destination 4, the
router now switches that source to Destination 4.
