enphase ENV-S-AM1-230-60, Инструкция по установке и эксплуатации

Страница: 19 / 37

IQ Gateway-M Installation and
Operation
19 ©
2022 Enphase Energy Inc. All rights reserved. 141-00031 Rev 02
Activate Monitoring
Register the IQ Gateway for monitoring of the Enphase Microinverters in Enlighten at
enlighten.enphaseenergy.com . Once you have registered the system and successfully installed the IQ
Gateway, Enlighten sets up an account for the site owner. When you complete the registration and
installation, Enphase sends account information to the site owner so that they can log in to the Enlighten
website and view system performance.
Method A: If the IQ Gateway is Associated with a System in Installer Toolkit
a. On your mobile device, go to your Wi-Fi settings and disconnect from the
Envoy’s AP network.
This should restore Internet connectivity to your device.
b. Return to the Enphase Installer App and tap the Sync button on the System Overview screen.
c. Log in to Enlighten and click on the system
activation’s name from the installer dashboard.
d. From the activation form, open Array
Builder. To see the Array Builder demo, go
to
enphase.com/support/videos .
•
If you used Installer Toolkit to build
arrays and scan microinverter serial
numbers, the array(s) are built. Make
any necessary adjustments in Array
Builder.
•
If you did NOT use Installer Toolkit to
build arrays and scan microinverter
serial numbers, create the virtual array
in Array Builder using the installation
map as your reference. (You may need
to wait if the microinverters have not yet
reported to Enlighten.)
Method B: If the IQ Gateway is NOT
associated with a System in Enphase Installer App
a. Log into Enlighten and click Add a New System from the installer dashboard.
b. Enter the System, Installer, Owner, and Location information.
c. Enter the Envoy serial number.
d. Click Save to submit the form.
e. After the microinverters have reported to Enlighten, open Array Builder from the activation form,
and create the virtual array, using the installation map as your reference. To see the Array
Builder demo, go to
enphase.com/support/videos .
View System Performance in
Enlighten
Once the array is built and the system is
activated, you can log in to Enlighten to view
site data. Enlighten displays a graphic
representation of the PV system. It also shows
detailed current and historical performance
information.