USER MANUAL
© 2010 EnOcean | www.enocean.com
EPM 300(C) OEM User Manual | Page 2/11
EPM 300(C)
REVISION HISTORY
The following major modifications and improvements have been made to the first version of this
document:
No
Major Changes
1.0
Initial version
1.1
New image of antenna area
1.2
Approval chapter added
Published by EnOcean GmbH, Kolpingring 18a, 82041 Oberhaching, Germany
www.enocean.com, [email protected], phone +49 (89) 6734 6890
© EnOcean GmbH, All Rights Reserved
Important notes!
This information describes the type of component and shall not be considered as assured characteris-
tics. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications
are subject to change without notice. For the latest product specifications, refer to the EnOcean web-
site:
http://www.enocean.com
.
As far as patents or other rights of third parties are concerned, liability is only assumed for modules,
not for the described applications, processes and circuits.
EPM 300 and EPM 300C are designed and produced as OEM products. They will be brought
to market by local OEM manufacturers
.
They are not considered to be finished end products
in terms of documentation, packaging and WEEE (electronic waste regulation). EnOcean
will not be reliable for consequences of any HW or SW changes/modifications of the EPM
300(C) done by the first marketer. Product warranty and support will be covered by the
OEM.
