EnGenius ESR350H, Руководство пользователя

Страница: 17 / 107

[ pg. 17]
Dynamic IP Address (DHCP)
A DHCP type of connection is where your Internet connection is usually always on and your Internet service provider automatically provides you with
an IP address. A DHCP connection is usually from a Cable Internet service.
Static IP
To set up a Static IP connection, enter the following: IP Address of the Internet Connection, Subnet Mask, Default Gateway, and both DNS Servers.
This information can be obtained by either your Internet Service provider or Network Administrator.
Point-to-Point Protocol over Ethernet (PPPoE)
To set up a PPPoE connection, enter the Username, Password, and Service (name) of the Internet connection provided by your ISP. Click Next and
the
ESR350H should connect to the Internet successfully. A PPPoE connection is usually from a DSL Internet service.
MTU: Maximum Transmission Unit. It specifies the largest packet size permitted for Internet transmission. The factory default MTU size of PPPoE is
1492. If you wish to manually change the MTU size, set it between 1200 and 1500.
Point-to-Point Tunneling Protocol (PPTP)
To set up a PPTP connection, enter the type of WAN connection (Static IP or DHCP). After, depending on the type of WAN, follow the instructions of
DHCP or Static IP to fill out the corresponding information. Then, proceed to enter the Username, Password, Service, and Connection ID of the PPTP
Internet connection. Once completed, click
Next . Once configured, the Internet connection will successfully connect.
MTU: Maximum Transmission Unit. It specifies the largest packet size permitted for Internet transmission. The factory default MTU size of PPTP is
1400. If you wish to manually change the MTU size, set it between 1200 and 1400.