EnGenius ESR350H, Руководство пользователя

Страница: 39 / 107

[ pg. 39]
7.5. PPTP
To set up a PPTP connection, enter the type of WAN connection (Static
IP or DHCP). After, depending on the type of WAN, follow the
instructions of DHCP or Static IP to fill out the corresponding
information. Then, proceed to enter the Username, Password, and
Service IP address provided by your ISP.
Clone MAC : Some ISPs require you to register the MAC address of your
network interface card (NIC) connected directly to your cable or DSL
modem during installation. Clone MAC will mask the router's MAC
address with the MAC address of your NIC. Enter the MAC address of the
NIC in the MAC address field and click the Clone MAC button. Now, the
correct MAC address is used for communication to the ISP.
Connection ID : you can leave it blank
MTU : Maximum Transmission Unit. It specifies the largest packet size
permitted for Internet transmission. The factory default MTU size of PPTP is 1400. If you wish to manually change the MTU size, set it between 1200
and 1500.
Type : Connection type, you can select Keep Connection, Automatic Connection, or Manual Connection.
Idle Timeout : Maximum amount of time for inactive Internet connection. The Internet connection will be dropped when the maximum idle time is
reached.
Click Apply to enable your settings.