EnGenius EOC-8610-S series Скачать руководство пользователя

Страница: 12 / 59

EOC-8610-S series 11a/b/g Wireless Multi-Client Bridge/AP/WDS

Version 2.2

3 Client Bridge Mode – Web Configuration

3.1 Logging In

To configure the Bridge through the web-browser, enter the IP address of the Bridge
(default:

192.168.1.1

) into the address bar of the web-browser and press

Enter

Make sure that the Bridge and your computers are configured on the same subnet.
Refer to

Chapter 2

in order to configure the IP address of your computer.

After connecting to the IP address, the web-browser will display the login page.
Specify the

User Name

and

Password

. The device does not have a User name and

password configured by default, therefore please leave the password field blank and
then click on the

Login

button.

After logging in you will graphical user interface
(GUI) of the bridge. The navigation drop-down
menu on left is divided into six main sections:

System

: This menu includes the administrator

settings, firmware upgrade, reset to factory
defaults, and system date/time configuration.

Wireless

: This menu includes the settings such

as network type (infrastructure/ad-hoc), data rate,
and security. Also included are advanced
wireless settings such as wireless MAC clone
and RTS/fragmentation threshold.

LAN

: This menu includes the configuration of the

LAN port and settings for the LAN IP, subnet
mask, default gateway and DHCP client.

Logs

: This menu displays a log of the critical and informational events that are

triggered on the device.

Statistics

: This menu displays the wired and wireless interface statistics.

Help

: This menu describes the features of the device and the parameters for each

setting.

The Bridge status page is also displayed once you have logged in. This includes

details about the system date and firmware, LAN IP address and MAC address and

Содержание EOC-8610-S series




























































Результаты поиска

Содержание EOC-8610-S series

Отзывы:

Похожие инструкции для EOC-8610-S series

Бренды по названию

Популярные бренды

EnGenius EOC-8610-S series, Руководство пользователя

Результаты поиска

Содержание EOC-8610-S series

Отзывы:

Похожие инструкции для EOC-8610-S series

Бренды по названию

Популярные бренды