3.4 Inserting the Battery
While the battery cover is removed, insert the battery into the battery compartment with the contacts
aligned with the Mini MT power contacts. The battery must be inserted into the battery compartment at a
45-degree angle with the contact end first. Ensure the contacts of the battery line up with the contacts in
the Mini MT. Push the battery in towards the contacts and then down firmly until fully seated in the
battery compartment. Replace the battery access door ensuring the latch is locked firmly in place.
3.5 Charging the Battery
The Mini MT must be fully charged prior to initial use.
Charging your Mini MT battery may be done using a standard USB Mini cable (optional: CAW-6000-0006)
connected to your desktop personal computer (PC).
NOTE: The PC must be turned on or powered up while charging the Mini MT.
For charging the Mini MT battery in a vehicle, an optional USB to vehicle accessory power adapter is
available (PSA-9000-0002) for purchase.
NOTE: Many vehicles do not provide power to the accessory jack when the vehicle ignition is off.
An alternate method for charging using AC power may be performed with the AC power to USB power
adapter (PSA-9000- 0101). Which is available for purchase.
Connect one end of the USB cable to the Mini MT and the other end to your power source. The Mini MT
ON LED will be on solid and the BAT LED will flash while charging.
When the Mini MT is fully charged the BAT LED will be off and the ON LED will be on solid while connected
to a USB power source.
NOTE: The USB cable needs to be either USB 1.1 or USB 2.0 compliant.
Содержание Enfora Mini MT
