Enfora Enfora Mini MT, Руководство пользователя

Страница: 24 / 54

Note: The AC power adapter used to charge the unit must be capable of supplying 5V@500mAh.
Mini MT Battery Charging Guidelines
The battery supplier specifies that the charging temperature range is between 0°C and 45°C. Charging
outside the recommended range may cause excessive heat or serious damage to the battery.
Do not use or leave the Mini MT in the hot sun or inside a car in direct sunlight for extended
periods. This may cause the battery to generate heat, swell, smoke, or flame. It might also cause
deterioration of the battery cell’s capacity or longevity.
A fully depleted battery typically takes 5 hours to charge. The actual charging time will depend on multiple
factors, including:

The level of charge remaining in the battery

The amount of current available from the USB host.

The ambient temperature
The temperature cut off for charging is 45°C on the high end, 0°C on the low end. The battery will not
charge while outside this range.
Once the battery reaches 100% charge, the charging current to the battery will be cut off until such time as
the battery may need additional charge. The USB will power the unit so long as the battery is in place.
The charging LED blinks red while charging and turns off when the charging has stopped. The LED will also
blink if the battery level is low (i.e. 20%) and the unit is not plugged in to a charger.
3.6 SIM Card Insertion
The SIM, an integral part of any GSM terminal device, is a “smart card” that is programmed with subscriber
information. The user information consists of an International Mobile Subscriber Identity (IMSI) number
which is registered with the GSM/GPRS service provider and an encryption Ki (pronounced “key”). This
information consists of a microprocessor and memory installed on a plastic card. A SIM card can be