Enfora Enfora Mini MT, Руководство пользователя

Страница: 41 / 54

4 Configuration
4.1 Configuration
The Mini MT must be configured before use. Configuration is performed through AT commands from a PC
computer. A terminal program is required to interface to the Mini MT through the USB cable.
The drivers for the Mini MT support Windows XP and Windows 7 64 Bit operating systems. While Enfora
uses HyperTerminal to configure the Mini MT, the user can use another terminal program.
The Mini MT drivers must be installed on your computer before proceeding.
4.2 Dispatch Number
The “Dispatch Number” is the phone number the Mini MT will call when the Push-To-Call (PTC) button is
pressed.
To configure the Mini MT to call phone number “1-214-555-1212” enter the following command:
AT$DSPATCH=“12145551212” <Enter>
After entering the dispatch number enter: AT&W <Enter> to save. This will ensure that if the battery is
removed the number will not need to be re-entered.
4.3 SMS Destination
The SMS Destination Address is where the Mini MT would send an SMS text message. The Mini MT can
store up to five (5) SMS Destination Addresses. The following example shows how to set an SMS
Destination Address:
AT$SMSDA=1, “19875551212”<Enter>