Enervision TP600 Series, Руководство пользователя

Страница: 19 / 33

Inverter power supply user’s manual
4-3
2
．
Place the unit
Put the unit on the right location of 19inch rack(Caution ： Additional support
must be added as bottom
！
). Try to push the unit from the front and side to see it
moves; and repeat the above actions until it is firmly secured..
3
．
Cable Connection
1
）
Connect DC input cable
Following battery polarity guide marked on rear panel! Place the battery cable
over TP600’s DC terminal.
For the user operation safety, cut off the power when install the unit!
2
）
Connect AC input and output
Use right cable according to different terminal of rear panel.
For Standard model:
take out the cable in accessories, plug the cable into
the socket of rear panel showed as follow figure:
For Simplified model:
use terminal block and notice LINE , NETURAL and
polarity
：