Inverter power supply user’s manual
5-1
5.Operation
5.1 Power ON/OFF
5.1.1 First power ON
z
Make sure the DC input voltage is according to the symbol on rear panel. Or, DO
NOT turn on and unit would be damaged. Consult from manufacture to
confirmation.
z
Inspect the polarity is correct
，
or unit can not power ON.
z
Inspect AC input and output is correct, make sure unit is not short-circuited.
z
Verify above mentioned, open DC and AC power.
z
Press power ON button:
All LEDs illuminate in turn and unit will perform self-diagnosis.
Unit is already running in normal mode
5.1.2 General operation
z
Only press ON/OFF button in daily use.
z
Power off: load
Æ
INVERTER.
z
Cut off the DC and AC input power and output load if long-term no use.
z
Switch on the unit according to the program of first power on after long-term no
use.
5.2 Operation
5.2.1 POWER ON
1
．
Make sure the DC input and AC output connect is correct
；
2
．
Turn on the unit
，
unit beeps one time and perform self-diagnosis.
。
note
：
ON/OFF button located on rear panel for Tower model.
Self-diagnosis status:
before output is steady, it takes 10ms for DSP to monitor the
system operation. When the systems is in abnormal condition or other
Содержание TP600 Series
Страница 1: ...TP600SERIES INVERTER POWER SUPPLY USER MANUAL ...
Страница 10: ......
Страница 13: ...Inverter power supply user s manual 3 3 Rack professional model 0 5 1 5KVA 2 5KVA ...
