enertik BC-F20HWR2-200L, Руководство по установке

Страница: 7 / 33

4
7 Timing Adjustment
Touch the TIME key 5s
,
hour of Period 1 start flashes
,
touch the UP key and DOWN key to modify hours
.
Touch
the TIME key again
,
minute flashes
,
touch the UP key
and DOWN key to modify minutes
.
Continue to touch the
TIME key to enter the time setting of Period 1 end
,
the
operation is the same . Period 2 and period 3 are set in
the same way . If the start and end time settings of the
time period are the same, the time period is deemed to
be canceled
.
8 Manual turn on electric heater
In the state of power on or off, press the ELECTRIC
HEATER key to enter or exit manual electric heating.
When manual electric heater is on, the electric heater
symbol lamp will be on.
9 Ventilation mode
Long press the ELECTRIC HEATER key to enter and
exit the ventilation mode.
10 Restore defaults
In the shutdown state, long press the ELECTRIC
HEATER key and SETTING key to restore factory
setting parameters.
11 Set system parameter
In any state, press SETTING key for 5 seconds, enter
the system parameter query interface, with UP key and
DOWN key to query each parameter.
In the system parameter query interface, press
SETTING key to enter the parameter setting interface;
with UP key and DOWN key to adjust parameter
setting.
3. Operation parameter table
NO. State Name Name Display Range Reservations
A Water tank inlet temp.
℃
-9~99 ℃ Error code P1
B Water tank outlet temp.
℃
-9~99 ℃ Error code P2
C Coil temp.
℃
-9~99 ℃ Error code P3
D Suction temp.
℃
-9~99
℃
Error code P4
E Ambient temp.
℃
-9~99 ℃ Error code P5
F EEV opening
℃
10~48 N*10