enertik BC-F20HWR2-200L, Руководство по установке

Страница: 4 / 33

1
I. Foreword
Please read the instruction carefully before install the unit, or we do not take any responsibility for the loss,
please take care of it for future reference (If updated, please refer to the latest version).
Safety warning
It may cause injures for people or damages for units if do not operate as following
Heat pump water
heater must be
installed by
Professionals.
The installation or
maintenance of the
unit must ensure that
the ground wire is
grounded safely and
reliably, and live
operation is strictly
prohibited.
Must use
220V-240V/50Hz
individual power supply.
Do not use mobile
socket, damaged
power cord and
socket.
Do not power
up until the
tank is filled with
water.
Do not put the
inflammable and
explosive material near
the unit.
Do not repair,
maintain, dismantle
or transform the unit
without permission .
Do not touch the plug
with wet hands.
Do not put your hands
or anything s close to
the air outlet and
blades.
In case of unit
abnormality, please
cut off the power
supply immediately
and contact our
personnel for
handling .
Safety notice
It may cause injures for people or poor performance of the unit if do not operate as following
Please cut off the power
supply and drain the
water from the heat pump
if it is not used for a long
time.
Please turn the water
temperature into 38~42 ℃
appropriately when
operating the unit.
Do not drink the water in
the heat pump directly.
The children must bath
under the guidance of
adult.
The water inlet and outlet
pipes of the unit must be
equipped with removable
filters.