Enerpac SBL1100, Инструкция по эксплуатации и техническому обслуживанию

Страница: 43 / 151

Document number: ED. 03622.00.001.R04.ENG
Page 43 of 151
ED.02518.00.001.R08.ENG
Page 43
4.1.3. Requirements for foundation material
The foundation material has to meet the following requirements:
Parameter Requirement
Timbers
Timber length > T min
< 612mm
Timber width > Timber height
Timber gap < Timber width
mechanical compressive strength > 25 N/mm² without occurrence
of deflection
)
Enerpac strongly recommends
adhering to 30N/mm², preferably
Azobé wood
Steel plates
Steel length > S min
Steel width = Timber width
Steel thickness > 15 mm
mechanical compressive strength > 30 N/mm² without occurrence
of deflection
Mounting properly secured
)
x
Wood is a natural product: its quality is not assured. In order to guarantee
quality, test the timbers on 125% of the expected load.
x
For your planning keep in mind that suitable wood may not always be available
immediately.
Hazard: Use of other wood types such as plywood, multiply, pine and compressed
wood is
explicitly prohibited .
Timber length
T min
Steel length
Steel thickness
Timber height
S min
Steel w idth