Energist UltraPlus VPL™ System
User Manual
SD1-43 Issue 3 (CCF 296)
38
Message:
“16 – Please Release Trigger Button”
Action:
Release trigger button and re-try. Attach a different applicator
and restart system. If the fault persists, contact your distributor.
Message:
“17 – Invalid ADC Please Consult Dealer”
Action:
Switch off the system and restart. If the fault persists, call your
distributor.
Message:
“18 – Applicator Read Count Fault”
Action:
Switch off the system and restart. If the fault persists, try the
following. Switch off the system and attach a different applicator
and restart system. If the fault persists, call your distributor.
Message:
“19 – Applicator Decrement Count Fault”
Action:
Switch off the system and restart. If the fault persists, try the
following. Switch off the system and attach a different applicator
and restart system. If the fault persists, call your distributor.
Message:
“20 – Applicator Count Check Fault”
Action:
Switch off the system and restart. If the fault persists, try the
following. Switch off the system and attach a different applicator
and restart system. If the fault persists, call your distributor.
Message:
“21 – Unable to open config file”
Action:
Switch off the system and restart. If the fault persists, call your
distributor.
Message:
“22 – Unable to open Control System comm port “
Action:
Switch off the system and restart. If the fault persists, call your
distributor.
Message:
“23 – Unable to open Counter System comm port “
Action:
Switch off the system and restart. If the fault persists, call your
distributor.
Message:
“24 – Invalid Registry “
Action:
Switch off the system and restart. If the fault persists, call your
distributor.
Message:
“25 – System has Expired, Please Enter Expiry Details”
Action:
Switch off the system and restart. If the message persists, call
your distributor.
Message:
“26 – Self Test : Charge Fault Detected, Please Reset Machine”
Action:
Switch off the system and restart. If the fault persists, call your
distributor.
Message:
“27 – Self Test : Bleed Enabled Fault Detected, Please Reset
Machine”
Action:
Switch off the system and restart. If the fault persists, call your