Energist UltraPlus VPL™ System
User Manual
SD1-43 Issue 3 (CCF 296)
27
4.12 Skin Therapies Treatment
To help ensure a successful skin rejuvenation treatment, follow the guidelines
as supplied in Clinic & Client Management and Treatment Guide.
To set up the system:
1. Ensure the 530 nm (yellow) applicator is attached
2. Turn on the system and
Log-in
3. Check there are enough shots left on the applicator to complete the
treatment. (If the applicator shot count is below 1000 it is advisable to
order a refurbishment)
4. Reset
Session
5. Select
Skin Therapies
from the
Treatment
section
6. Select
Skin Type
of client (based on Fitzpatrick I – V scale)
7. Select
Degree
of the severity
of the sun damage
8. The system now calibrates the preferred pulse settings and a safe
starting energy density
9. Tap
Treat
to charge system
10. Tap
OK
to confirm treatment parameters
11. The system will now charge and be ready to fire
12. Increase or decrease energy as required to achieve clinical endpoint
