Energist UltraPlus VPL™ System
User Manual
SD1-43 Issue 3 (CCF 296)
25
Thread Veins
Body
Use for treatment of Thread veins on the trunk or
legs.
Thread Veins
Face
Use for the treatment of facial thread veins
Acne Vulgaris
Allows for treatment of mild to moderate active acne
Pigmentation
Use for the treatment of epidermal pigmented lesions
(Solar or senile lentigines)
Skin Type
Refers to the skin type of the client as based on the
Fitzpatrick Scale
Hair Type/Degree/
Vein Type/Depth
Allows a specific selection dependent upon which
treatment is to be carried out.
Energy (J/cm
2
)
Indicates the energy density set for the treatment.
This can be increased or decreased using the
up/down arrows or by dragging the indicator bar up
or down the slider
Applicator
(Type)
Indicates which applicator is attached to the system.
Shots
Indicates how many shots are remaining on the
applicator.
Change
Change button allows you to change the applicator
while the system is on. (See 4.4 Change the
Applicator)
Session
Indicates how many shots have been fired. This
count can be reset, thus is useful for recording
treatment data.
Pulses
Pressing the Pulses button allows the user to alter
the pulse settings. (Only available in
USER3
)
Treat/Standby
Treat/Standby button allows you to put the system
into charge mode or back into standby. Toggles
between Treat and Standby.
Status
Indicates whether the system is charging, charged or
in standby
Language: Tapping this option allows the user to
select an available language. (Can only be altered by
your Distributor)
Load: Allows the user to load specific user-defined
treatment setting. (Only available in
USER3
)
Save: Allows the user to save a specific user-defined
treatment setting. (Only available in
USER3
)
Exit: this allows the user to Log Off or shutdown the
system