Energie Combi 12, Инструкция по сборке и эксплуатации

Страница: 7 / 35

ASSEMBLY AND USER MANUAL
Combi [6 | 12 | 16] & Combi 12 HT
www.energie.pt
7
The temperature difference brought about by the previous factors ensures that the fluid will change to vapour state
inside the panel.
The compressor aspirates the refrigerant fluid (vapour) of the panel, raising the pressure and temperature thereof,
which is transmitted to the water circuit by way of a heat exchanger.
The Exchanger is located inside the cabinet (Combi Block), providing heat to the water which is inside.
When the refrigerant fluid reaches the expansion valve it is at its liquid phase and the load loss owing to
strangulation reduces the pressure and the fluid is re-prepared for entry into the panels.
4.2. Technical Specifications
The
ENERGIE Combi Systems are presented on the market in a range of 4 models in accordance with the table
below:
Un. Combi 6 Combi 12 Combi 16 Combi 12HT
Th
e
rm
o
d
yn
am
ic
So
lar
Pan
e
ls
Quantity 6 12 16 12
Weight kg 48 96 128 96
Exposed Capture Surface m² 9,6 19,2 26,6 19,2
R
e
fr
ig
e
ran
t
Type R 407C R 407C R 407C R 134a
Amount (pre charge) kg 1,6 2 2,5 2
Test Pressure bar 30
LP Switch Open Value bar 1 0,3
LP Switch Close Value bar 2 1,7
HP Switch Open Value bar 28 21
HP Switch Close Value bar 23 16,0
El
e
ctr
ic
al
Data
Single Phase / Three Phase 1P+N 3P+N 1P+N 3P+N 1P+N 3P+N
Power Supply
220-240V~
50Hz
380-420V~
50Hz
220-240V~
50Hz
380-420V~
50Hz
220-240V~
50Hz
380-420V~
50Hz
Rated Power Consumption* kw 1,2 - 2,2 1,9 - 3,1 3,2 - 5,2 1,7 - 3,0
Auxiliary Heater 1 kw 4,5 4,5 6 6
Auxiliary Heater 2 (DHW) kw 1,5 1,5 1,5 1,5
Output Capacity kw 4,9 - 9,7 9,2 - 16,7 14,2 - 24,2 7,8 - 15,8
D
o
m
e
sti
c Hot
Wate
r
Material Stainless Steel
Capacity l 200
Safety Thermostat Activ. °C 80
Cathodic Protection Magnesium Anode
Maximum Running
Pressure
bar 7
Maximum Running
Temperature
°C 80 (safety thermostat)
Expansion Vessel l 5
Inlet / Outlet Connections inch 3/4"
H
e
ating
Heating Pipe Diameter mm 28
Pressure Safety Valve bar 7
Expansion Vessel l 10 (installations<120l)
Nominal Flow m³/h 0,7 1,1 1,5 1
*Rated Power Consumption Without Auxiliary Heater 1 and 2