Energic Plus LF5 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 44

Energic Plus LF5 Скачать руководство пользователя страница 38

38/44

12.2. Overview per parameter
Parameter 1: gassing voltage

Programmable values:

•  Blank/empty: 2.30 V/cell
•  Red: 2.35 V/cell
•  White: 2.38 V/cell
•  Blue: 2.40 V/cell (default)
•  Yellow: 2.42 V/cell
•  Purple: 2.45 V/cell
•  Cyan: 2.48 V/cell
•  Green: 2.51 V/cell

Parameter 2: maximum voltage

Programmable values:

•  Blank/empty: 2.55 V/cell
•  Red: 2.65 V/cell
•  White: 2.75 V/cell
•  Blue: 2.80 V/cell (default)
•  Yellow: 2.85 V/cell
•  Purple: 2.90 V/cell
•  Cyan: 3.00 V/cell
•  Green: disabled

Parameter 3: equalize mode

Programmable values:

•  Blank/empty: Type.0 – refresh mode 15 min
•  Red: Type.1 – refresh mode 30 min
•  White: Type.2 – long refresh
•  Blue: Type.3 – weekly ULTRA SOFT
•  Yellow: Type.4 – weekly SOFT
•  Purple: Type.5 – weekly MEDIUM
•  Cyan: Type.6 – weekly HARD
•  Green: Type.7 – weekly ULTRA HARD

Type.0 – refresh mode 15 min

After charging is complete, the charger will wait 2 hours for the battery to cool down and then
perform a 15-minute EQ cycle. After that, the charger will cool down for 10 hours and refresh for
15 minutes.

Type.1 – refresh mode 30 min

After charging is complete, the charger will wait 6 hours to allow the battery to cool down, after which
it will perform a 30-minute EQ cycle. After that, the charger will cool down for 10 hours and refresh for
30 minutes.

Type.2 – long refresh

After the charge is complete, the charger will wait 14 hours to allow the battery to cool down, after
which it will perform a 40-minute EQ cycle. After that, the charger will cool down for 14 hours and
refresh for 30 minutes.

Type.3 – weekly ULTRA SOFT

After charging is complete, the charger will wait 24 hours to allow the battery to cool down, after
which it will perform a 2-hour EQ cycle. After that, the charger goes into sleep mode for 6 days and
starts the recharge cycle for 2 hours.

Type.4 – weekly SOFT

After charging is complete, the charger will wait 24 hours to allow the battery to cool down, after
which it will perform a 3-hour EQ cycle. After that, the charger goes into sleep mode for 6 days and
starts the recharge cycle for 3 hours.

«
...
36
37
38
39
40
...
»

Содержание LF5













































Отзывы:

Нет отзывов