18/44
6.4.
Adjusting a parameter
1. Hold down the EQ button for 1 second.
2. To browse through the parameters, press the STOP/RE-START
button.
3. If the Alarm/Warning LED continues to flash red and the
RGB LED shows different colours (this is to indicate the
programmable parameters) the unit is ready to adjust the
values.
The programmable parameters:
Parameter 1: gassing voltage
Parameter 2: maximum voltage
Parameter 3: equalize mode
Parameter 4: charge mode
A clear overview for each parameter can be found in
Annex 12.2.
Parameters 5 to 8 are intentionally not shown as these
are settings for the technician to adjust.
If you still have questions about these settings or think
you have changed them by mistake, contact your
dealer.
1
3
4
2
4. If you wish to change a parameter, you must select it by
pressing and holding the EQ button for 3 seconds.
5. Do this until the “Alarm/Warning” LED lights up red
continuously.