12/44
3.
SAFETY INSTRUCTIONS
3.1.
Explanation of the safety decals
If the decals are damaged or missing, please replace them.
Decal
Explanation
Reference
Read the manual before using the product
166TA7573
This is an electrical device
163TA6970
Be careful when working with electrical equipment
166TA7574
3.2.
General safety instructions
• TVH Parts Holding NV cannot envisage each possible circumstance that may result
in danger. Therefore the warnings given in this publication and which appear on the
equipment are not exhaustive.
In the event that equipment, procedures, work methods or working techniques are used
that are not specifically advised by the TVH Parts Holding NV company, it is necessary to
make sure that there is no danger to the operator or other people.
• Electrical equipment must be installed and maintained in accordance with all the applicable
national and local codes. A power disconnect switch must be located near the equipment.
Check the type plate for voltage and phase requirements.
• Never extend the charging lead without prior approval of the manufacturer. Extending the
charging leads without prior approval of the manufacturer may cause incorrect operation of
the charger and will void the warranty.
• Battery chargers can cause injury or death, damage to other equipment or property, if the
user does not strictly observe all safety rules and take precautionary actions.
• Bare conductors or terminals in the output circuit or underground and exposed live
equipment can fatally shock a person.
• Always keep sparks, flames, burning cigarettes and other sources of ignition away from the
battery charging area.