21/44
1. Charging cycle
Phase 1: The LED colours RED (flashing)
During the first phase of charging, the RGB LED flashes RED and the Alarm/Warning
LED is off.
During the 1-phase, the battery voltage is low and the DC output current is high.
Phase 2: The LED is GREEN (flashing)
When the second stage starts, the RGB LED flashes green while the ALARM/
WARNING LED remains off.
The first phase is completed when the battery voltage reaches the gas point. After
this, the charger enters its final phase.
During the final phase, the battery voltage is high and the DC output current is low.
WSa charging Phase: the LED is WHITE (flashes) (this only occurs in the WSa charging profile)
During the end phase, the charger alternates high current pulses
with pauses at zero current to reduce the the battery temperature.
The colour WHITE (flashing) indicates the breaks.
If you have set the charger to WSa charging profile, the charger
alternates pulses of high current with pauses of no current during
the final phase.
Final stage : The LED is GREEN (solid)
When the entire process is completed, the control board stops the charging
process. From this moment on, the LED RGB is in continuous GREEN colour; the
charging process has been successfully completed.
