26
EQ99 Operation Manual Rev. 2
Chapter 5
MAINTENANCE
Fiber Cleaning Process
Fiber Cleaning Basics:
•
The LDLS laser fiber connector is carefully inspected and is clean prior to shipment.
Energetiq strongly recommends leaving the laser fiber connected, unless necessary for
installation or routing of the laser fiber.
•
Leave Laser Fiber SMA connected whenever possible.
•
If the SMA fiber must be disconnected, always use a metal cap on both ends.
•
Store caps open side down when possible.
•
Blow out caps with CDA (Clean Dry Air) prior to use.
•
Never leave the fiber disconnected without a cap.
•
Follow the fiber inspection and cleaning process (Figure 8) before making a laser fiber
SMA connection.
•
Operating the LDLS with a contaminated fiber introduces the risk of decreased
performance or damage to the unit.
Energetiq Ex. 2060, page 32 - IPR2015-01375
