EQ99 Operation Manual Rev. 2
13
Input/Output (I/O) Connector
Provides access to control and status signals. See Chapter 3 for pin assignments and functions.
This is the only operator interface to the EQ-99-FC – there are no local controls. Energetiq
offers the EQ-99-RC Remote Control Module which connects to the Input/Output
connector and provides a means of local control. Contact Energetiq for additional
information.
Power Input Connector
This is a latching input connector for 12 VDC power. Power can be provided using the
optional PS00018 12VDC power supply. Alternatively, the EQ-99-FC can be powered directly
from a customer provided 12VDC power supply. See Chapter 3 for detailed information.
Lamp House Signal Connector (mini D sub – 9-pin)
Provides various power and control signals to/from the Lamp House module. No other
connector or cable may be used with the EQ-99-FC other than the one supplied.
Armored Laser Fiber
The laser light is delivered from the Power Supply Controller to the Lamp House via a fiber
optic cable with armored protection. The fiber is permanently attached to the Power Supply
Controller, and connected to the Lamp House by an SMA-type connector.
It is critical that this armored fiber be treated with care and inspected for any abnormalities
prior to operation. Avoid sharp bends, which will permanently damage the fiber. Minimum
bend radius is 30mm (1.18 in). Avoid crimping or compressing the fiber.
Lamp House
The Lamp House assembly contains:
•
Lamp
•
Igniter
•
IR pumping optics
•
Output window
•
Laser ON indicator
•
Interface connectors
Energetiq Ex. 2060, page 19 - IPR2015-01375
