3
UV-MAX Safe Operation Procedure
1. Always wear personal protective equipment (PPE) when operating UV-MAX
ULTRA to limit exposure to UV-C light
2. Place UV-MAX ULTRA in area to be treated
3. Ensure a PIR Sensor (Passive Infrared) is positioned toward the entryway. PIR
sensors operations are explained in the FAQ section at the end of this manual.
4. Connect UV-MAX ULTRA to 120vac plug receptacle
5. Press Start Cycle on UV-MAX ULTRA control and exit treatment area
6. Adhere to recommended safety precautions to avoid potential injury
Safety
1. You should never look directly at a UV lamp in operation without wearing approved
safety glasses. Safety glasses should be made of any material other than Quartz or
Teflon.
2. The space should be vacant and closed prior to UV-MAX ULTRA operation
3. Never command the system on when the treatment space is occupied
Safety Observation:
It is required for the person(s) responsible
for the installation of this equipment, operators of this equipment, and
operation personnel managers to review and understand this manual.
USE OF LISTED SYSTEM / EQUIPMENT MUST COMPLY WITH
INSTRUCTIONS AND SAFETY REQUIREMENTS.
