10
Status Screens
Room Sensing Technology covered on this page.
Room Sensing Feature
The UV-MAX ULTRA is equipped with Room Sensing Technology in which the device will
calculate the distance between walls and calculate the required machine run-time depending
on Operation Mode (Bacteria or Spores) selected.
1. From Home Screen, press Right Arrow at
bottom right of screen.
2. Room Sensing Screen will appear with
distance shown between each measuring
laser and wall. This screen is for observation
only.
a.
Each laser will measure up to a 16’
radius for a total of 32’ forward and
backward and 32’ side to side
b. The machine will always calculate run-
time based on the longest measured
point ensuring a sufficient treatment
dose
c. If any distance measure is greater than
16’, the machine will automatically run
30-minute cycle on Bacteria setting and
60-minute cycle on Spores setting.
3. Cycle time is displayed on Room Sensing
screen and can be observed automatically
adjusting with movement of the machine and
selection of target Operation mode
4.
Press “Home” button to return to Start Cycle
screen for initiating treatment
